What Are the 7 Stages of Plastering? Plastering might look simple once it’s finished — smooth walls, sharp edges, clean lines — but the process behind that perfect finish involves skill, patience, and a clear structure.

Whether you’re learning the trade, hiring a professional, or just curious, understanding the 7 stages of plastering can give you a better appreciation of the work involved.

Let’s break it down step-by-step.

1. Preparation

Plastering always starts with good prep. A solid finish is only possible if the surface beneath is clean, sound, and ready for plaster.

Here’s what this stage involves:

  • Removing dust, debris, wallpaper, and flaky paint
  • Repairing cracks or loose materials
  • Applying bonding agents or sealers, especially on absorbent or dusty surfaces

This stage sets the foundation. Rushing it often leads to problems later on.

2. Applying a Scratch Coat (Base Coat)

When plastering onto bare brick or blockwork, a scratch coat is often applied first. This is a thicker undercoat that:

  • Levels out uneven walls
  • Creates a good key (grip) for the next layer
  • Is often scored or “scratched” to help the next coat stick

For some surfaces, this step may be skipped or replaced with a bonding coat, depending on what you’re plastering onto.

3. Floating (Leveling the Surface)

Once the base is on, the next step is to float the wall — essentially levelling and flattening the surface.

Using tools like a straight edge or darby, the plasterer ensures the wall is even from top to bottom. Any hollows or high spots are corrected here. This stage is key for ensuring the final surface looks seamless once painted.

4. Applying the First Finish Coat (Skim Coat)

Now the plaster starts to look like plaster.

A thin layer of finishing plaster (commonly known as the first skim) is applied over the base or floated coat. This coat:

  • Is usually about 2mm thick
  • Needs to be applied quickly and evenly
  • Begins to give the wall that smooth, professional look

Timing is critical here — the plaster starts to set quickly, so precision matters.

5. Second Finish Coat (Final Skim)

Shortly after the first skim, a second layer is applied.

This layer:

  • Helps smooth over any imperfections in the first coat
  • Allows for extra finesse in the trowelling process
  • Is the final visible layer before painting or decorating

Together, the two skim coats combine to create a flawless finish.

6. Trowelling and Polishing

Once the skim coat begins to set (but hasn’t fully dried), it’s time for the plasterer to start trowelling.

This involves:

  • Repeatedly smoothing the surface with a steel trowel
  • Using light pressure to flatten any lines, ridges or edges
  • Sometimes adding a little water to help refine the finish

This is where experience really shines — the difference between a decent job and a perfect one is often found in this stage.

7. Drying and Final Checks

The plaster now needs time to fully dry, which usually takes a few days depending on the temperature and humidity.

At this stage, the plasterer will:

  • Check for any blemishes or missed spots
  • Lightly sand (if needed) once the plaster is bone dry
  • Offer advice on when to start decorating (typically when the plaster has turned a pale pink)

Painting too soon can ruin the finish, so patience is key!

Wrapping Up

So, what are the 7 stages of plastering?

  1. Preparation
  2. Scratch coat
  3. Floating
  4. First skim
  5. Second skim
  6. Trowelling and polishing
  7. Drying and final checks

Each stage plays a vital role in achieving a long-lasting, high-quality result. Skipping or rushing any one of them can lead to cracks, flaking, or uneven surfaces.

At Smith Plastering, we don’t cut corners — we follow every stage with care and precision to give you flawless results that last.

Need a quote or some advice?

We’re just a call away — smooth walls are only 7 steps away – contact us here!